Pharmaceutical
The pharmaceutical industry uses manufacturing processes where stainless steel pipes and flanges are omnipresent. These pipes and flanges must be at zero contamination levels when used. Therefore, all the fabrication stages in the different maintenance and construction operations must be beyond reproach in this respect, such as machining parts prior to welding.
SERCO machining equipment has been specially designed for this type of specific use. The chips generated by machining are easy to collect and are evacuated outside the pipe. No particles are released into the environment. Clamping is done on the outside of the pipe to avoid damaging the inside of electro-polished pipes and to avoid causing contamination. This also guarantees perfectly concentric clamping and avoids any pipe deformation even on thin-walled pipes.
US25CH - Tube and pipe beveling machine with pneumatic drive 730 W
12.5 mm (0.49") ID
120 mm (4.72") ODUS40 - Tube & Pipe Chamfering Machine with pneumatic drive ID locking beveling machine
43 mm (1.69") ID
273 mm (10.75") ODSE2T - Facing machine for tubes, fittings, micro fittings and elbows
3 mm (0.12") ID
60.3 mm (2.37") ODSE65 - Facing machine for tubes, fittings, micro fittings and elbows
12.7 mm (0.50") ID
60.3 mm (2.37") ODSE90NG - Tube squaring and beveling machine with pneumatic drive
10 mm (0.39") ID
90 mm (3.54") ODSE120 - Tube squaring and beveling machine with pneumatic drive 730 W
50 mm (1.97") ID
120 mm (4.72") ODTTSNG168 - Clamshell Cutting & Beveling machine-Pipe Cold Cutting Machine for pipes from 88 to 168 mm
88.9 mm (3.50") ID
168.3 mm (6.63") ODTU200 Flange & Valve Facing Equipment. Portable lathes for sealing surfaces, flanges and bores
0 mm (0.00") ID
200 mm (7.87") ODXP600 Portable Equipment for Facing Flanges and Valves
0 mm (0.00") ID
600 mm (23.62") ODUS6 - Orbital Tube Cutting Saw for Ø from 0.5" to 6"
12.7 mm (0.50") ID
168 mm (6.61") ODOCM - Orbital Cutting and Beveling Machine for Tubes and Pipes - Pipe Cutter
168.3 mm (6.63") ID
3048 mm (120.00") ODUS3 - Orbital Tube Cutting Saw for Ø from 0.196" to 3.5"
5 mm (0.20") ID
88.9 mm (3.50") ODUG1 - Tungsten Electrode Sharpener & Grinder